ALL-ACCESS

          A/C Float Switches & Drain Line Cleanouts

           Clear A/C Drain Lines Fast & Easy

           "Install & Never Cut The Line Again"

 

         


           

NEW CODES FOR HVAC CONTRACTORS

IMC & IRC CODE (307.2.5) & (M1411.3.3)

"DRAIN LINE MAINTENANCE"

"Condensate drain lines shall be configured to allow the clearing of blockages and performance of maintenance without having to cut the line."


ALL-ACCESS PRODUCTS

____________________________________________________________________

MODEL AA1

Condensate Cleanout Device


          1) Blow Out The Drain Line In Either Direction

 

          2) Use Wet/Vac to Vacuum or Flush Line with Water

          3) Easy Access to Add Drain Cleaners or Tablets

          4) Installs in Line Either Horizontal or Vertical

NOTE: If you need a vent in the drain line for a vacuum break, simply remove the cap and valve core from the valve on the top cover 

________________________________________________________________

 

MODEL AA1-FS

COMBINATION CLEANOUT DEVICE WITH

BUILT-IN FLOAT SWITCH

Installs Horizontally or Sloped up to 45 Degrees in Primary Drain Line or Plugged on Secondary Outlet of Drain Pan
UL LISTED AND TESTED TO UL 508 (CODE APPROVED)

_____________________________________________________________________

MODEL AA2-FS & AA2P (PLENUM RATED)

CONDENSATE OVERFLOW SHUT-OFF SWITCHES

 Installs On Primary & Auxiliary Drain Pans


UL LISTED AND TESTED TO UL 508 & 2043 (PLENUM) (CODE APPROVED)


_____________________________________________________________________

MODEL AA3

AUXILIARY DRAIN PAN FLOAT SWITCH

 Installs On Primary & Auxiliary Drain Pans


LOCK IT ON - PUSH IT DOWN - WIRE IT UP

UL LISTED AND TESTED TO UL 508 (CODE APPROVED)


_____________________________________________________________

MODEL AA1-INS

Insulation To Prevent Sweating

 

Fits perfectly On ALL-ACCESS Devices To Prevent Sweating When They Are Used In Unconditioned Spaces Such As Attics

(Sold Separately)


____________________________________________________

MODEL AA-TOOLS

NITROGEN & WATER FLUSH TOOLS

“CLEAR DRAIN LINES FAST & EASY”

 

Tools are Designed to Fit Onto ¾” PVC Drain Lines and the All-Access® Adaptor

 

The Water Flush Tool Attaches to a Standard Garden Hose Sprayer


(Package Contains Both Tools and is Sold Separately From The AA1)

AA1
MODEL AA1 CLEANOUT
AA1-FS
MODEL AA1-FS
AA2-FS
MODEL AA2-FS
AA2P
MODEL AA2P
AA3
MODEL AA3
FITS ON AA1 & AA1-FS ADAPTOR OR 3/4" PVC PIPE
MODEL AA-TOOLS
AA1-INS
MODEL AA1-INS